Aiva Fertiliser Loading
Office Hours 09:00 - 17:00 | Monday - Friday

Transformer

A soil conditioner with a highly effective ability to improve the infiltration, distribution and drainage of irrigation water and rain into the soil.

Reduces waterlogging, runoff and leaching
improves infiltration of water in compacted soil, resulting in lower penetration resistance and less restriction of root growth
reduces hydrophobicity and improves water retention through better distribution in sandy soil
improves the uniform distribution of soil-applied pesticides, herbicides and nutrients

SKU: TRANSFORMER Crops: , , , , , Challenge:
w/w %
Alcohol Ethoxylate 20.0

TRANSFORMER — Improve Soil Hydraulics & Unlock Root Potential

TRANSFORMER is able to lower the surface tension of water. When applied to soil, this results in improvents of key soil hydraulic properties; such as infiltration, drainage, hydraulic conductivity, soil water retention and hydrophobicity.

By improving these soil properties, the applied water is available to the plant and is not lost through run-off, channelling or uneven wetting of the soil profile. The application of TRANSFORMER allows water to even infiltrate the micro-pores of compacted layers. Thereby the penetration resistance of the compact layer is alleviated, and this will allow root growth.


Key Performance Drivers

INCREASES FEEDER ROOT GROWTH
The improved hydraulic conductivity and an increase in aerobic function in soil results in explosive feeder root growth. The expanded surface area and root mass of the feeder roots greatly increases the root / soil / nutrient contact surface area.

OPTIMIZES NUTRIENT UPTAKE & H2O TRANSPORT
The increase in root surface area optimizes the uptake of water and nutrients such as N, P, K, Zn, Ca, Fe, Mg, Mn from the soil. This growth has demonstrated the ability to reduce plant stress, accelerate canopy expansion, improve uniformity of crop ripening and increase yields.

STIMULATES MICROBIAL ACTIVITY
Better soil aeration results in increased microbial activity which leads to enhanced nutrient utilization. Additionally, properly aerated soil hosts fewer moisture related root diseases such as Phytophthora spp.


WHAT TO EXPECT

A single treatment per season improves the infiltration rate of water for subsequent irrigation cycles. Improved infiltration into the micro-pores will lead to:

  • Less run-off of irrigation water, therefore more effective use of water.
  • Improved moisture content in compacted layers, resulting in less penetration resistance.
  • Improved drainage on soils that are prone to water-logging and improved oxygen levels.
  • Increased availability of nutrients and proliferation of micro-organisms.
  • Improved lateral distribution of water under drip irrigation, resulting in less fluctuation between cycles.

Trials have shown improved root growth and stimulation of Rhizobium nodules on legume crops as a result of better aeration and drainage of soil.


MODE OF ACTION

The application of TRANSFORMER improves the infiltration rate of water into small pores, for example in heavy or compacted soil. TRANSFORMER bridges the unfavourable response between water and hydrophobic soil particles allowing the soil to be efficiently wetted thereby improving moisture distribution through the soil profile.


Please get in touch see any crop specific data.

TRANSFORMER should ideally be applied through an irrigation system (drip, microsprinkler, or overhead). However, it can also be applied onto bare soil pre-planting, at planting, or post-planting with a boom sprayer.

In Loam or Sandy Soils:

  • Rate: Apply 5-10 L/ha.
  • Phase 1: Moisten the soil with water only during the first 25% of the irrigation process.
  • Phase 2: Inject 5-10 L/ha during the following 50% of the irrigation process to improve distribution.
  • Phase 3: End the irrigation with water only to ensure TRANSFORMER is adequately washed into the soil.

In Heavy Soils or Superficial Crusting:

  • Rate: 10-15 L/ha (applied at 5 L/ha every 15 days).
  • Sequence: Follow the same 25/50/25 irrigation sequence mentioned above.
  • Dilution: The rate should not exceed 1 litre of TRANSFORMER per 1000 litres of water (concentration ≤ 0.1%).

Please see product label for specific rates.

Subscribe

Get the latest news and information directly to your inbox.

Newsletter Signup
First
Last